DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F)
PSA · 2.0L HDi/BlueHDi Diesel I4
1999–present
"PSA's 2.0 diesel, also sold as the Ford 2.0 TDCi (2004 on), Volvo 2.0D, Suzuki and Toyota. The 8-valve 90 PS is one of the toughest diesels around, with 450,000 km+ examples; the 110 and 136-140 PS add a dual-mass flywheel, FAP and a busier turbo and are the weakest; the 150/163 PS and BlueHDi are well regarded, with AdBlue the main BlueHDi complaint. Budget for clutch and flywheel, keep the EGR and FAP clean with motorway runs."
Mileage Risk Timeline
When problems typically appear — enter your mileage to see your risk zone
Known Issues 5
Timing belt and tensioner - preventive replacement
▸Preventive only - a noisy tensioner is the usual warning; a snapped belt bends valves
Belt-driven engine. Timing complaints are mostly a noisy tensioner rather than failures; one owner paid about 500 EUR for a full timing kit with water pump at 106,000 km. Follow the interval in the service book.
Ask for the belt invoice before buying; without it, budget the job immediately.
Dual-mass flywheel and clutch wear (110 PS and later)
▸Vibration, clunking on engagement, rattle at idle and on shutdown
The 8-valve 90 PS has a solid flywheel; from the 110 PS on, a dual-mass flywheel is fitted and is the most reported failure, described as not durable on the 136-140 PS. Owner reports: clutch at 110,000 km, flywheel and clutch about 2,300 EUR at 167,000 km. Earlier cost and km figures had no source.
Athens traffic wears the flywheel faster; replace flywheel and clutch together.
Turbo faults - often a split boost hose or wastegate control
▸Loss of power, limp mode, whistle or hiss under boost, boost fault codes
Turbos are described as fragile on the 136-140 PS and more often blamed on the 110 PS because of higher boost, but many cases turn out to be the boost hose or wastegate control rather than the turbo. On Ford versions, charge-air hoses on diesels built to 2008 tear early.
Check the boost hoses and wastegate control before agreeing to a new turbo.
EGR valve and FAP/DPF clogging (worst on 110 and 136-140 PS)
▸DPF/FAP warning, limp mode, black smoke, rough idle, EGR fault codes
The FAP appeared on the 110 PS and is its most reported fault; on the 136-140 PS the EGR valve and FAP clog repeatedly. The 140 PS and later engines are much better; a BlueHDi used only in town clogged its FAP at 48,000 km. EGR valve replacement incl. diagnosis 150-900 EUR (generic price guide). Earlier FAP cost and km figures had no source.
Highway runs essential. City-only use in Athens clogs EGR and FAP; 20+ minutes on the motorway every couple of weeks.
Injector fouling - often cleanable rather than faulty
▸Rough idle, smoke, misfire, hard starting
Injectors are a frequent complaint on the 90 PS, but specialists note they are often replaced when a clean would do; single injector failures reported on later engines (one at 187,000 km on a 150 PS).
Ask for an injector leak-off and cleaning test before paying for new injectors.
This report covers the combustion engine only. Battery and electric motor reliability are not included.
Models with DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F) 92
Related Guides
Other PSA Engines
EW10 2.0
EW10 2.0 16V (RFN/RFJ/RFK)
View details → Compare: DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F) vs EW10 2.0DW8 1.9D
DW8 1.9D (WJZ)
View details → Compare: DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F) vs DW8 1.9DEW7 1.8
EW7 1.8 16V (6FZ/6FY)
View details → Compare: DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F) vs EW7 1.8XU10 2.0
XU10 2.0 16V (RFV/RFX/RFS)
View details → Compare: DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F) vs XU10 2.0Tuning Potential
200hp Stage 1
Frequently Asked Questions
Is the PSA DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F) reliable?
The PSA DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F) scores 78/100 with a verdict of BUY. It has 5 documented issues with total repair costs between €150 and €3,700.
What are the common problems with the DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F)?
The most common issues are:
- Timing belt and tensioner - preventive replacement — high, repair cost N/A–€500, N/A–N/A
- Dual-mass flywheel and clutch wear (110 PS and later) — high, repair cost N/A–€2,300, 110,000 km–170,000 km
- Turbo faults - often a split boost hose or wastegate control — moderate, repair cost N/A–N/A, N/A–N/A
- EGR valve and FAP/DPF clogging (worst on 110 and 136-140 PS) — moderate, repair cost €150–€900, N/A–N/A
- Injector fouling - often cleanable rather than faulty — minor, repair cost N/A–N/A, N/A–N/A
What cars use the PSA DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F)?
How much does it cost to repair the DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F)?
Total potential repair costs for all 5 known issues range from €150 to €3,700. The most expensive issue is typically Dual-mass flywheel and clutch wear (110 PS and later).
What years was the DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F) produced?
The PSA DW10 2.0 HDi / BlueHDi / Ford 2.0 TDCi (DW10TD/ATED/BTED4/CTED4/DW10F) was produced from 1999 to present. It is a 1997cc I4 diesel engine.
Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.