ACCEPTABLE Maturity

4N14

Mitsubishi · 2.3L Diesel I4

2010–present

0 / 100
ACCEPTABLE

"Mitsubishi's own 2.2 DI-D (2,268 cc) with a timing chain - Outlander III, ASX automatic, Eclipse Cross and the 2019+ L200. Smooth and strong, but the balance-shaft coupling wears: left alone it can break a timing-chain sprocket, and owners report EUR 3,000-5,000 bills with no recall. Short trips also push fuel into the oil during DPF regeneration. Buy one with proof the balance-shaft coupling was renewed."

Layout I4
Displacement 2268 cc
Power 150–177 hp
Type Diesel
Known Issues 3
Total Risk Cost €3,000–€5,000

Mileage Risk Timeline

When problems typically appear — enter your mileage to see your risk zone

km

Known Issues 3

◆ CRITICAL

Balance-shaft coupling failure — can break a timing-chain sprocket

€3,000–€5,000 110,000 km–190,000 km
View details ▸
Detection

Rattle or knocking from the front of the engine, new vibration at idle; on a car with no record of the balance-shaft coupling being replaced, treat any timing-area noise as this

Details

The coupling that drives the balance shafts wears. Owners report balance shafts failing at about 110,000 km (EUR 5,000 repair) and, if ignored, a broken timing-chain sprocket at about 180,000-190,000 km; the Mitsubishi repair kit alone is quoted at over EUR 3,000 plus long labour. Mitsubishi has issued no recall and owners report no goodwill. A German used-car guide lists defective balance shafts as the main fault of the otherwise durable Outlander III diesel.

Greece Note

Ask for the invoice for the balance-shaft coupling. No Greek-specific data found.

● MODERATE

Oil dilution by diesel during DPF regeneration

N/A–N/A N/A–N/A
View details ▸
Detection

Oil level rising above the max mark on the dipstick, diesel smell from the oil, frequent DPF regeneration (fan running after shutdown)

Details

When a particulate-filter regeneration is interrupted, unburnt fuel reaches the sump and the oil level rises. Outlander 2.2 owners report needing oil changes every 4,000 km. Diluted oil lubricates poorly. Longer drives let regenerations finish.

Greece Note

Athens short trips are the worst case for this. Check the dipstick, not just the service book. No Greek-specific data found.

● MODERATE

EGR valve and intake flap soot fouling

N/A–N/A N/A–N/A
View details ▸
Detection

Engine warning light, loss of power, rough idle, EGR or intake-flap fault codes

Details

The EGR valve clogs fairly quickly and soot can make the intake flaps stick; a German guide warns soot on injectors and the EGR valve can lead to costly repairs on the Outlander diesels. No EUR or km figure in any reachable source.

Greece Note

Mostly city use makes it worse. No Greek-specific data found.

Models with 4N14 4

Other Mitsubishi Engines

Tuning Potential

Limited

Frequently Asked Questions

Is the Mitsubishi 4N14 reliable?

The Mitsubishi 4N14 scores 75/100 with a verdict of ACCEPTABLE. It has 3 documented issues with total repair costs between €3,000 and €5,000.

What are the common problems with the 4N14?

The most common issues are:

  • Balance-shaft coupling failure — can break a timing-chain sprocket — critical, repair cost €3,000–€5,000, 110,000 km–190,000 km
  • Oil dilution by diesel during DPF regeneration — moderate, repair cost N/A–N/A, N/A–N/A
  • EGR valve and intake flap soot fouling — moderate, repair cost N/A–N/A, N/A–N/A
What cars use the Mitsubishi 4N14?

The 4N14 is found in:

How much does it cost to repair the 4N14?

Total potential repair costs for all 3 known issues range from €3,000 to €5,000. The most expensive issue is typically Balance-shaft coupling failure — can break a timing-chain sprocket.

What years was the 4N14 produced?

The Mitsubishi 4N14 was produced from 2010 to present. It is a 2268cc I4 diesel engine.

Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.