6G74
Mitsubishi · 6G74 3.5 V6
1997–2006
"The 3.5 V6 GDI (direct injection, 203 hp) of the 2000-2006 Pajero. It is the most troublesome of the Pajero petrol V6s: expensive fuel injection that hates poor fuel, coking of the piston rings and injector wear after about 150,000 km. Like the other Mitsubishi V6s it uses a timing belt with a hydraulic tensioner and needs clean oil to protect its narrow crank bearings. The older port-injected 3.5 is more robust."
Mileage Risk Timeline
When problems typically appear — enter your mileage to see your risk zone
Known Issues 3
GDI fuel system problems: injectors, fuel-quality sensitivity and carbon/piston-ring coking
▸Hard starting after standing, rough running, misfires, very high fuel use, oil consumption
The direct-injection 6G74 has expensive fuel equipment and does not tolerate low-grade (92-octane) fuel. Owners report injector and fuel-system faults from about 150,000 km, mostly linked to poor fuel, and the engine tends to coke its piston rings; repair-size pistons are no longer sold. Specialist media advise expecting problems with the 203 hp GDI engine. No reachable source gives a EUR repair cost.
Avoid low-octane fuel and use original filters; check for hard starting and smoke before buying. No Greek-specific data found.
Crankshaft bearing wear from oil starvation
▸Low oil pressure, knocking from the bottom end
The V6 crank bearings are narrow and heavily loaded, and the engine is very sensitive to oil level and oil-pump condition. Specialist sources report bearing damage on engines built up to 2009 and advise watching oil pressure closely at 250,000-300,000 km. No cost given.
Check the oil level and oil pressure often. No Greek-specific data found.
Timing-belt hydraulic tensioner and hydraulic lifter failure
▸Sharp knock or ticking, flapping timing belt
The hydraulic belt tensioner often fails before the rest of the timing kit; a slack belt can jump teeth. Oil deposits clog the hydraulic lifters, which may need replacing from about 100,000 km and rarely last beyond 200,000 km. Replacing all lifters costs about EUR 250 according to Kolesa.ru (parts only, upper cost not given).
Replace the tensioner with every timing-belt change.
Models with 6G74 1
Other Mitsubishi Engines
Tuning Potential
None practical
Frequently Asked Questions
Is the Mitsubishi 6G74 reliable?
The Mitsubishi 6G74 scores 75/100 with a verdict of ACCEPTABLE. It has 3 documented issues with total repair costs between €250 and €0.
What are the common problems with the 6G74?
The most common issues are:
- GDI fuel system problems: injectors, fuel-quality sensitivity and carbon/piston-ring coking — high, repair cost N/A–N/A, 150,000 km–N/A
- Crankshaft bearing wear from oil starvation — high, repair cost N/A–N/A, 250,000 km–300,000 km
- Timing-belt hydraulic tensioner and hydraulic lifter failure — moderate, repair cost €250–N/A, 100,000 km–200,000 km
What cars use the Mitsubishi 6G74?
The 6G74 is found in:
- Pajero (2000–2006)
How much does it cost to repair the 6G74?
Total potential repair costs for all 3 known issues range from €250 to €0.
What years was the 6G74 produced?
The Mitsubishi 6G74 was produced from 1997 to 2006. It is a 3497cc V6 petrol na engine.
Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.