F4P
Renault · F4P 1.8 16V
1998–2005
"Renault 1.8 16V petrol of the F family (1998-2005): Laguna I and II, Megane I and Scenic I. A simple, long-lived engine if serviced, with a timing belt and a variable-timing pulley (phaser) on the intake camshaft. The belt must be changed every 120,000 km or 5 years: the valves bend if it slips or breaks, so the job must be done correctly. Typical faults are the phaser pulley, ignition coils and engine electronics (throttle body, sensors, engine computer). The 2.0 (F4R) is the bigger sibling."
Mileage Risk Timeline
When problems typically appear — enter your mileage to see your risk zone
Known Issues 4
Timing belt - valves bend if it slips or breaks
▸Preventive item: check the service record; a slipped belt shows as clatter, running on three cylinders, stalling or no start
The F4P drives its camshafts with a toothed belt and the valves hit the pistons if the belt breaks or jumps. Haynes gives the Laguna 1.8 16V (F4P) belt interval as 120,000 km or 5 years. Owner reports show the risk of poor belt work: a wrong belt and a badly fitted belt cover bent the valves on a 1999 Laguna 1.8 16V, and an under-torqued crankshaft pulley bolt let the timing slip one tooth on a 2001 Laguna II. No source gives a price for the belt kit.
Change the belt kit with the water pump on time and only at a workshop that uses the Renault locking tools and torque values. No Greek-specific data found.
Engine electronics faults: throttle body, engine computer, sensors
▸Unstable idle, engine accelerating on its own or limited revs, engine warning light, sensor fault codes
An engine database lists sensor and wiring faults and an unstable idle that is often cured by cleaning the throttle body and injectors. French owner reviews of 2001 Laguna II 1.8 cars report a failed throttle body, injection computer and accelerator-pedal sensor, and in another car a failing main computer at 243,000 km with a repair estimate of EUR 2,000-2,500 (one owner). No general price range found.
No Greek-specific data found.
Intake camshaft phaser (variable timing pulley) failure
▸Diesel-like clatter from the timing side, especially at idle or after a cold start; loss of power
The F4P has an oil-pressure-operated phaser pulley on the intake camshaft. An engine database says it can fail and crack, possibly before 100,000 km, and is expensive to replace; owners on French forums name it as a known risk. Usually replaced together with the timing belt. The same part is the classic fault of the 2.0 F4R. No source gives a repair price.
If the engine clatters at idle, have the phaser checked before the next belt change. No Greek-specific data found.
Ignition coil failure - misfire
▸Misfire, engine running on two or three cylinders, jerking, engine warning light
The F4P has one coil per spark plug. An engine database lists recurring ignition-coil, sensor and wiring faults, a Laguna II 1.8 owner needed three new coils, and a French owner review of a 2001 Laguna II 1.8 lists the coils among its faults. No reliable repair price found.
No Greek-specific data found.
Models with F4P 3
Related Guides
Other Renault Engines
Tuning Potential
None
Frequently Asked Questions
Is the Renault F4P reliable?
The Renault F4P scores 80/100 with a verdict of BUY. It has 4 documented issues with total repair costs between €0 and €0.
What are the common problems with the F4P?
The most common issues are:
- Timing belt - valves bend if it slips or breaks — high, repair cost N/A–N/A, N/A–N/A
- Engine electronics faults: throttle body, engine computer, sensors — moderate, repair cost N/A–N/A, N/A–N/A
- Intake camshaft phaser (variable timing pulley) failure — moderate, repair cost N/A–N/A, N/A–N/A
- Ignition coil failure - misfire — minor, repair cost N/A–N/A, N/A–N/A
What cars use the Renault F4P?
How much does it cost to repair the F4P?
Total potential repair costs for all 4 known issues range from €0 to €0.
What years was the F4P produced?
The Renault F4P was produced from 1998 to 2005. It is a 1783cc I4 petrol na engine.
Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.