M96 vs M64 (993: M64/05, M64/06, M64/21; Turbo M64/60)
Side-by-side reliability comparison
Specifications
Character
M96
"The first water-cooled Porsche flat-six, used in the 986 Boxster (2.5/2.7/3.2) and 996 Carrera (3.4/3.6), 1997-2005. Lovely to drive, but it carries three expensive risks: the intermediate shaft (IMS) bearing, worst on the single-row bearing of 2000-2005 cars (about 8-10% failures, subject of a US class action); cracked or slipped cylinder liners and "D-chunk" cracks in the Lokasil bores, most common on early 996s; and bore scoring. The rear main seal weeps on many cars. Buy only with proof of an IMS retrofit or a recent inspection, a clean oil filter and a borescope check. The 996 Turbo, GT2 and GT3 use the different Mezger engine."
M64 (993: M64/05, M64/06, M64/21; Turbo M64/60)
"The 3.6 air-cooled flat-six of the Porsche 993 (1993-1998), the last air-cooled 911: Carrera 272 hp, Carrera S 285 hp with VarioRam, and the 408 hp twin-turbo Turbo. No IMS bearing - that is the later water-cooled M96. The known weak spot of the naturally aspirated engines is valve-guide wear: worn guides burn oil and clog the secondary-air ports, and the Porsche Club of America says every non-Turbo 993 will need its guides done eventually. The Turbo used a better guide material. Otherwise expect age-related oil leaks and change the twin-distributor drive belt on time. Ask for oil-use history and a leak-down test."