Higher reliability score
1.8 TDDi / DI (Endura-DI) BUY 84/100
+3 points over Duratec HE 1.8 (Mazda L8)
0 / 100
BUY Duratec HE 1.8 (Mazda L8) Ford
0 / 100
BUY 1.8 TDDi / DI (Endura-DI) Ford

Specifications

Duratec HE 1.8 (Mazda L8)
1.8 TDDi / DI (Endura-DI)
Brand
Ford
Ford
Verdict
BUY
BUY
Reliability
81
84
Years
2000--2018
1998--2004
Displacement
1798 cc
1753 cc
Layout
I4
I4
Type
Petrol Na
Diesel
Power
110--126 hp
75--90 hp
Known Issues
4
1
Total Risk Cost
€680--€940
€0--€0

Character

Duratec HE 1.8 (Mazda L8)

"The 1.8 16V petrol shared by Ford (Mondeo Mk3, Focus Mk2, C-Max), Mazda (L8: Mazda 5, Mazda 6, MX-5 NC) and the Volvo S40/V50 1.8. Naturally aspirated with a timing chain; engine guides quote 275,000-360,000 km. In Ford cars the plastic swirl flaps in the intake manifold wear, rattle and can break off into the engine - listen for a rattle at idle and have them checked or removed. Oil use rises with mileage, the thermostat sticks, and valve clearances need checking about every 100,000 km (no hydraulic lifters)."

1.8 TDDi / DI (Endura-DI)

"Pre-common-rail Ford 1.8 diesel (Focus Mk1 TDDi 75/90 hp, Fiesta Mk4 1.8 DI). Direct injection with an electronically controlled rotary pump. Owners rate it far better than the later 1.8 TDCi; the injection pump and its control unit are the one known weak point, typically after 120,000 km."

Issues Comparison

Duratec HE 1.8 (Mazda L8) 4

◆ CRITICAL
Intake swirl flaps wear and break off into the engine (Ford intake) €680--€940 84,000 km--160,000 km
● MODERATE
Oil consumption at high mileage N/A--N/A N/A--N/A
○ MINOR
Timing chain and cam phaser wear (very high mileage) N/A--N/A 200,000 km--N/A
○ MINOR
Thermostat sticks N/A--N/A N/A--N/A

1.8 TDDi / DI (Endura-DI) 1

▲ HIGH
Injection pump control unit failure N/A--N/A 120,000 km--200,000 km

Models

Full Duratec HE 1.8 (Mazda L8) Report Full 1.8 TDDi / DI (Endura-DI) Report