Higher reliability score
1.6 E.torQ BEST 89/100
+19 points over 1.3 MultiJet / MultiJet II (Fiat SDE)
0 / 100
ACCEPTABLE 1.3 MultiJet / MultiJet II (Fiat SDE) Fiat
0 / 100
BEST 1.6 E.torQ Fiat

Specifications

1.3 MultiJet / MultiJet II (Fiat SDE)
1.6 E.torQ
Brand
Fiat
Fiat
Verdict
ACCEPTABLE
BEST
Reliability
70
89
Years
2003--2020
2014--2020
Displacement
1248 cc
1598 cc
Layout
I4
I4
Type
Diesel
Petrol Na
Power
70--95 hp
110 hp
Known Issues
5
1
Total Risk Cost
€0--€0
€0--€0

Character

1.3 MultiJet / MultiJet II (Fiat SDE)

"Fiat's small chain-driven diesel (1,248 cc, 2003-2020), also sold as Opel/Vauxhall 1.3 CDTI, Suzuki 1.3 DDiS, Peugeot/Citroen 1.3 HDi and Alfa 1.3 JTDm. MultiJet II (2009 on, Euro 5) adds a particulate filter on most cars. Owner surveys point at injectors, EGR, the DPF in city use, the turbo control and a timing chain that can stretch; none of it is catastrophic, but the chain must be checked. Clutch and dual-mass flywheel wear are common on high-mileage cars."

1.6 E.torQ

"Brazilian-built 1.6 16V petrol (Fiat/FPT E.torQ, ex-Tritec plant) sold in Europe in the Jeep Renegade, Fiat 500X and Tipo with 110 hp. Simple multi-point engine with a timing chain. Little European data exists: owners mention oil consumption and leaks, and on the related 1.8 a corroded oil cooler can mix oil into the coolant if the coolant is not maintained. Use the correct coolant and check the oil level."

Issues Comparison

1.3 MultiJet / MultiJet II (Fiat SDE) 5

▲ HIGH
Timing-chain stretch / tensioner wear N/A--N/A N/A--N/A
● MODERATE
EGR valve sooting on short trips N/A--N/A N/A--N/A
● MODERATE
Particulate filter clogging (MultiJet II, Euro 5/6) N/A--N/A N/A--N/A
● MODERATE
Injector faults — hard starting, rough running, power loss N/A--N/A N/A--N/A
● MODERATE
Turbo / boost-control faults N/A--N/A N/A--N/A

1.6 E.torQ 1

● MODERATE
Oil consumption or oil leaks - owner reports N/A--N/A N/A--N/A

Models

Full 1.3 MultiJet / MultiJet II (Fiat SDE) Report Full 1.6 E.torQ Report