Higher reliability score
5.2 FSI V10 BUY 83/100
+18 points over 6.0 W12
0 / 100
CAUTION 6.0 W12 Audi
0 / 100
BUY 5.2 FSI V10 Audi

Specifications

6.0 W12
5.2 FSI V10
Brand
Audi
Audi
Verdict
CAUTION
BUY
Reliability
65
83
Years
2003--2010
2006--2015
Displacement
5998 cc
5204 cc
Layout
W12
V10
Type
Petrol Na
Petrol Na
Power
450 hp
435--560 hp
Known Issues
2
3
Total Risk Cost
€0--€0
€370--€740

Character

6.0 W12

"Audi's naturally aspirated 6.0 W12 in the A8 D3 (2003-2010): two narrow-angle VR6 banks on one crank, 450 PS. With good care it is a durable long-runner, but it is complex and very sensitive to overheating, which can score the cylinders and raise oil use. The cams are driven by three chains at the flywheel end; worn tensioners mean an engine-out repair, as do some of the eight lambda sensors. It dislikes short trips, sustained full load and tuning. Repair costs are high and not every workshop will take it on."

5.2 FSI V10

"Naturally aspirated 5.2 direct-injection V10 of the S6 C6, S8 D3 and first-generation R8 V10. No engine recall and few complaints, but it is an expensive engine to keep: intake valves coke up like all FSI engines and need periodic walnut cleaning, and the timing chains sit at the back, so chain or guide work means taking the engine out. Buy with full service history."

Issues Comparison

6.0 W12 2

◆ CRITICAL
Timing chain tensioners and chain drive (engine-out job) N/A--N/A N/A--N/A
▲ HIGH
Overheating sensitivity - water pump, cylinder scoring and oil consumption N/A--N/A N/A--N/A

5.2 FSI V10 3

▲ HIGH
Timing chain and guide wear (rear-mounted, engine-out job) N/A--N/A 150,000 km--N/A
● MODERATE
Intake-valve carbon build-up (direct injection) €370--€740 97,000 km--129,000 km
○ MINOR
Ignition coil failure (10 coils) N/A--N/A N/A--N/A

Models

Full 6.0 W12 Report Full 5.2 FSI V10 Report