3.0 V6 30V (EA835: ASN/AVK/BBJ) vs 5.2 FSI V10 Gen 2 (dual injection)
Side-by-side reliability comparison
Specifications
Character
3.0 V6 30V (EA835: ASN/AVK/BBJ)
"Audi's naturally aspirated 3.0 30-valve V6 (2000-2008, 218-220 hp): A4 B6/B7 and Cabriolet, A6 C5 and A8 D3 (ASN/AVK in Europe, BBJ in other markets). Smooth and long-lived - an engine database gives about 350,000 km - but it uses a timing belt as well as cam chains, and the coolant pump is its weak spot: a broken impeller or failed pump causes overheating, can take the belt with it, and overheating can crack the block. Cam adjusters and chain tensioners wear around 100,000 km, and ignition coils fail often. Ask for the belt and water-pump invoice."
5.2 FSI V10 Gen 2 (dual injection)
"Naturally aspirated 5.2 V10 of the second-generation Audi R8 (Type 4S, 2015-2024, 540-620 hp). It is not turbocharged: Audi lists it as one of the last naturally aspirated engines in its class, with port injection added to the direct injection. No mechanical engine recall is on record; the only engine-related recall is a software update to the engine-sound control (2016-2018 cars). The one documented fault is a dealer bulletin for a false low-oil warning caused by excess factory sealer blocking the oil-pump strainers. UK owner surveys are positive, and the known cost items are the clutch, rear wishbones and magnetic dampers rather than the engine. Few independent reports exist for this low-volume engine, so buy with full Audi service history."