3.0 V6 30V (EA835: ASN/AVK/BBJ)
Audi · 3.0 V6 NA (ASN/AVK/BBJ)
2000–2008
"Audi's naturally aspirated 3.0 30-valve V6 (2000-2008, 218-220 hp): A4 B6/B7 and Cabriolet, A6 C5 and A8 D3 (ASN/AVK in Europe, BBJ in other markets). Smooth and long-lived - an engine database gives about 350,000 km - but it uses a timing belt as well as cam chains, and the coolant pump is its weak spot: a broken impeller or failed pump causes overheating, can take the belt with it, and overheating can crack the block. Cam adjusters and chain tensioners wear around 100,000 km, and ignition coils fail often. Ask for the belt and water-pump invoice."
Mileage Risk Timeline
When problems typically appear — enter your mileage to see your risk zone
Known Issues 4
Coolant pump failure and overheating (can crack the block)
▸Coolant loss, steam, temperature warning, sweet smell; check the coolant level and look for leaks at the pump
A UK parts specialist calls the coolant-pump impeller a known weakness of the 3.0 V6 that can break and cause sudden coolant loss and overheating, and advises replacing the pump at 60,000-80,000 miles (about 97,000-129,000 km, converted). A US owner reported a water-pump failure at 68,000 miles (about 109,000 km) on an A6 3.0. An engine database says the engine is sensitive to overheating and that overheating has cracked blocks. No source gives a price for the pump alone.
Sources advise replacing the water pump with every timing belt. No Greek-specific data found.
Timing belt failure (often after the water pump fails)
▸No warning before it snaps; ask for the invoice of the last belt, tensioner and water-pump change
The 3.0 V6 uses a timing belt together with cam chains. An Australian workshop gives a belt interval of 60,000-90,000 miles (about 97,000-145,000 km), says the water pump and tensioner should be replaced with it and that a snapped belt causes severe engine damage. A US A6 3.0 owner reported that the water pump failed at 68,000 miles and took the timing belt with it; the dealer quoted USD 2,380 for belt and pump (about EUR 2,190, converted).
No Greek-specific data found.
Camshaft adjusters and chain tensioners wear
▸Rattle for a few seconds after a cold start, camshaft-timing fault codes, rough running
An engine database says the camshaft adjusters (phase regulators) of the 3.0 V6 often need repair or replacement at around 100,000 km; a UK parts specialist says the chain tensioners wear and cause a cold-start rattle. No source gives a repair price.
No Greek-specific data found.
Ignition coil failure
▸Misfire, flashing engine light, rough running; smoke from a coil in rare cases
An engine database names ignition coils as the most common failure of the 3.0 V6. US owners of 2002-2003 A4 3.0 cars reported coil packs failing at under 3,000 miles, at 8,750 and 9,250 miles and at 37,000 miles, and two A6 3.0 owners reported a coil catching fire. Owners say the 1.8T had a coil recall but the 3.0 did not. No source gives a price.
No Greek-specific data found.
Models with 3.0 V6 30V (EA835: ASN/AVK/BBJ) 2
Related Guides
Other Audi Engines
2.5 TFSI I5 (EA855: CEPA, CZGA/CZGB, DAZA, DNWA)
2.5L Turbo I5
View details → Compare: 3.0 V6 30V (EA835: ASN/AVK/BBJ) vs 2.5 TFSI I5 (EA855: CEPA, CZGA/CZGB, DAZA, DNWA)4.0 TDI V8 EA898
4.0 TDI V8 EA898 (CZAC/DCZF) SQ7/SQ8
View details → Compare: 3.0 V6 30V (EA835: ASN/AVK/BBJ) vs 4.0 TDI V8 EA8985.2 FSI V10 Gen 2 (dual injection)
5.2 FSI V10 NA Gen 2 (R8 Type 4S, CSPA/CSPB)
View details → Compare: 3.0 V6 30V (EA835: ASN/AVK/BBJ) vs 5.2 FSI V10 Gen 2 (dual injection)EA837 3.0 TFSI supercharged
3.0L TFSI Supercharged V6
View details → Compare: 3.0 V6 30V (EA835: ASN/AVK/BBJ) vs EA837 3.0 TFSI superchargedTuning Potential
Supercharger kits exist
Frequently Asked Questions
Is the Audi 3.0 V6 30V (EA835: ASN/AVK/BBJ) reliable?
The Audi 3.0 V6 30V (EA835: ASN/AVK/BBJ) scores 75/100 with a verdict of ACCEPTABLE. It has 4 documented issues with total repair costs between €2,190 and €2,190.
What are the common problems with the 3.0 V6 30V (EA835: ASN/AVK/BBJ)?
The most common issues are:
- Coolant pump failure and overheating (can crack the block) — high, repair cost N/A–N/A, 97,000 km–129,000 km
- Timing belt failure (often after the water pump fails) — high, repair cost €2,190–€2,190, 97,000 km–145,000 km
- Camshaft adjusters and chain tensioners wear — moderate, repair cost N/A–N/A, 100,000 km–N/A
- Ignition coil failure — moderate, repair cost N/A–N/A, N/A–N/A
What cars use the Audi 3.0 V6 30V (EA835: ASN/AVK/BBJ)?
How much does it cost to repair the 3.0 V6 30V (EA835: ASN/AVK/BBJ)?
Total potential repair costs for all 4 known issues range from €2,190 to €2,190. The most expensive issue is typically Timing belt failure (often after the water pump fails).
What years was the 3.0 V6 30V (EA835: ASN/AVK/BBJ) produced?
The Audi 3.0 V6 30V (EA835: ASN/AVK/BBJ) was produced from 2000 to 2008. It is a 2976cc V6 petrol na engine.
Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.