2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) vs 5.2 FSI V10 Gen 2 (dual injection)
Side-by-side reliability comparison
Specifications
Character
2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES)
"Audi's 2.7 V6 with two small turbos (1999-2005): A4 B5 S4 (265 hp) and RS4 (380 hp), and the A6 C5 and allroad 2.7T (250 hp). Strong and very tunable, but expensive to keep: the timing belt and its tensioner are the biggest risk - a failure bends the valves, and the front of the car has to come apart to change it - and the turbos often need replacing between about 100,000 and 190,000 km. It is a hot-running engine: water pump, thermostat, PCV hoses and gaskets leak with age. Buy only with proof of a recent belt job and turbo history."
5.2 FSI V10 Gen 2 (dual injection)
"Naturally aspirated 5.2 V10 of the second-generation Audi R8 (Type 4S, 2015-2024, 540-620 hp). It is not turbocharged: Audi lists it as one of the last naturally aspirated engines in its class, with port injection added to the direct injection. No mechanical engine recall is on record; the only engine-related recall is a software update to the engine-sound control (2016-2018 cars). The one documented fault is a dealer bulletin for a false low-oil warning caused by excess factory sealer blocking the oil-pump strainers. UK owner surveys are positive, and the known cost items are the clutch, rear wishbones and magnetic dampers rather than the engine. Few independent reports exist for this low-volume engine, so buy with full Audi service history."