2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES)
Audi · 2.7 Biturbo V6 (AGB/AZB/ASJ)
1999–2005
"Audi's 2.7 V6 with two small turbos (1999-2005): A4 B5 S4 (265 hp) and RS4 (380 hp), and the A6 C5 and allroad 2.7T (250 hp). Strong and very tunable, but expensive to keep: the timing belt and its tensioner are the biggest risk - a failure bends the valves, and the front of the car has to come apart to change it - and the turbos often need replacing between about 100,000 and 190,000 km. It is a hot-running engine: water pump, thermostat, PCV hoses and gaskets leak with age. Buy only with proof of a recent belt job and turbo history."
Mileage Risk Timeline
When problems typically appear — enter your mileage to see your risk zone
Known Issues 4
Timing belt and tensioner failure (bends the valves)
▸No warning before failure; ask for the invoice of the last belt, tensioner, rollers and water pump; cold-start rattle can point to worn cam-chain tensioners
A UK parts specialist calls timing belt and idler tensioner failure the single most dangerous issue of the 2.7T and advises a change every 50,000-60,000 miles (about 80,000-97,000 km); an engine database gives 60,000 km and says a broken belt bends the valves, and that the cam chains should be renewed every second belt change. A US tuning retailer says the belt is virtually inaccessible without removing the front core support and bumper. A full belt service at an independent shop costs about USD 800-1,500 (about EUR 740-1,380, converted).
No Greek-specific data found.
Turbocharger failure (twin K03/K04)
▸Siren-like whine under boost, blue smoke, loss of boost, oil in the intercooler pipes
Owners of early (2000-2001) B5 S4 cars reported numerous turbo failures to NHTSA, and a US tuning retailer says the stock turbos can fail even on completely stock engines. An engine database says the turbos often last under 100,000 km; a UK parts specialist says they typically fail at 100,000-120,000 miles (about 161,000-193,000 km) and that skipped oil changes speed up wear. Replacement is hard because the turbos sit deep in the engine bay. Parts cost about USD 1,000-2,500 per turbo (about EUR 920-2,300 each, converted), plus labour.
Change the oil on time - a source says skipped oil changes speed up turbo wear. No Greek-specific data found.
Oil and vacuum leaks (PCV system, cam covers, rear crank seal)
▸Oil smell, oil on the undertray, rising oil use, rough idle or lean codes from vacuum leaks
A UK parts specialist says PCV system failure is common at 80,000-120,000 miles (about 129,000-193,000 km) and causes oil leaks, oil consumption and rough idle; an engine database says finding oil and air leaks is a common headache; a US tuning retailer advises renewing the valve-cover gaskets, rear crank seal and oil pan gasket while the engine is out. B5 S4 owners told NHTSA about cam-cover and cam-adjuster gasket leaks and quoted Audi bulletin 05-03 (2005) for these gaskets. No source gives a price.
No Greek-specific data found.
Water pump and thermostat housing leaks
▸Coolant loss, temperature warning, coolant smell after driving
An engine database calls the 2.7 biturbo a very heat-loaded engine whose water pump and thermostat are not reliable; a UK parts specialist says coolant leaks from the water pump and thermostat housing are common on high-mileage cars and that the pump should be replaced with every timing belt. No source gives a price.
Sources advise replacing the water pump with every timing belt. No Greek-specific data found.
Models with 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) 2
Related Guides
Other Audi Engines
2.5 TFSI I5 (EA855: CEPA, CZGA/CZGB, DAZA, DNWA)
2.5L Turbo I5
View details → Compare: 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) vs 2.5 TFSI I5 (EA855: CEPA, CZGA/CZGB, DAZA, DNWA)4.0 TDI V8 EA898
4.0 TDI V8 EA898 (CZAC/DCZF) SQ7/SQ8
View details → Compare: 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) vs 4.0 TDI V8 EA8985.2 FSI V10 Gen 2 (dual injection)
5.2 FSI V10 NA Gen 2 (R8 Type 4S, CSPA/CSPB)
View details → Compare: 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) vs 5.2 FSI V10 Gen 2 (dual injection)EA837 3.0 TFSI supercharged
3.0L TFSI Supercharged V6
View details → Compare: 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) vs EA837 3.0 TFSI superchargedTuning Potential
400hp+ Stage 1 (RS4)
Frequently Asked Questions
Is the Audi 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) reliable?
The Audi 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) scores 63/100 with a verdict of CAUTION. It has 4 documented issues with total repair costs between €1,660 and €3,680.
What are the common problems with the 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES)?
The most common issues are:
- Timing belt and tensioner failure (bends the valves) — critical, repair cost €740–€1,380, 60,000 km–97,000 km
- Turbocharger failure (twin K03/K04) — high, repair cost €920–€2,300, N/A–193,000 km
- Oil and vacuum leaks (PCV system, cam covers, rear crank seal) — moderate, repair cost N/A–N/A, 129,000 km–193,000 km
- Water pump and thermostat housing leaks — moderate, repair cost N/A–N/A, N/A–N/A
What cars use the Audi 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES)?
How much does it cost to repair the 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES)?
Total potential repair costs for all 4 known issues range from €1,660 to €3,680. The most expensive issue is typically Turbocharger failure (twin K03/K04).
What years was the 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) produced?
The Audi 2.7 V6 Biturbo (EA835: AGB/AZB/ASJ, A6 AJK/ARE/BES) was produced from 1999 to 2005. It is a 2671cc V6 petrol turbo engine.
Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.