Mazda Skyactiv-G 2.0 (PE-VPS/PE-VPR)
BUY Mature Modern

Skyactiv-G 2.0 (PE-VPS/PE-VPR)

Mazda · 2.0L NA I4

2012–present

0 / 100
BUY

Capped at 84: scores above 84 need at least 5 independent sources, including an official or specialist one. Rubric result: 98/100.

"Skyactiv-G 2.0 (PE-VPS): high-compression direct-injection 2.0 with a timing chain, used in the Mazda3, Mazda6, CX-3, CX-30, CX-5 and MX-5 since 2012. Owners and the specialist press report no engine failure pattern; the only recurring note is intake and injector deposits, typical of direct injection and worse with long oil-change intervals or poor fuel."

Layout I4
Displacement 1998 cc
Power 120–165 hp
Type Petrol Na
Known Issues 2
Total Risk Cost €80–€200

Mileage Risk Timeline

When problems typically appear — enter your mileage to see your risk zone

km

Known Issues 2

○ MINOR

Intake valve and injector carbon deposits (direct injection)

N/A–N/A N/A–N/A
View details ▸
Detection

Rough idle, hesitation, slightly higher fuel consumption

Details

With direct injection, fuel no longer washes the intake valves, so deposits build on the valves and injectors. Specialist sources call it the only expected weak point of this engine and link it to oil changed less often than every 15,000 km, the wrong oil viscosity (0W-20 recommended) or poor fuel.

Greece Note

Use good-quality fuel and change the oil at least every 15,000 km or yearly.

○ MINOR

MAF sensor fault codes

€80–€200 60,000 km–120,000 km
View details ▸
Detection

Check engine light, slightly rough idle, fuel economy dip

Details

MAF sensor can trigger fault codes without failure. Clean or replace. Very cheap.

Greece Note

Very inexpensive fix. Any workshop in Greece.

⚡

This report covers the combustion engine only. Battery and electric motor reliability are not included.

Models with Skyactiv-G 2.0 (PE-VPS/PE-VPR) 21

Related Guides

Other Mazda Engines

Tuning Potential

N/A

Frequently Asked Questions

Is the Mazda Skyactiv-G 2.0 (PE-VPS/PE-VPR) reliable?

The Mazda Skyactiv-G 2.0 (PE-VPS/PE-VPR) scores 84/100 with a verdict of BUY. It has 2 documented issues with total repair costs between €80 and €200.

What are the common problems with the Skyactiv-G 2.0 (PE-VPS/PE-VPR)?

The most common issues are:

  • Intake valve and injector carbon deposits (direct injection) — minor, repair cost N/A–N/A, N/A–N/A
  • MAF sensor fault codes — minor, repair cost €80–€200, 60,000 km–120,000 km
What cars use the Mazda Skyactiv-G 2.0 (PE-VPS/PE-VPR)?

The Skyactiv-G 2.0 (PE-VPS/PE-VPR) is found in:

  • 626 (1997–2001)
  • MX-5 (2019–present)
  • 3 (2013–2019)
  • CX-5 (2012–2017)
  • 6 (2012–2023)
  • CX-3 (2015–2024)
  • 3 (2013–2019)
  • 6 (2012–2023)
  • 3 (2019–present)
  • CX-30 (2019–present)
How much does it cost to repair the Skyactiv-G 2.0 (PE-VPS/PE-VPR)?

Total potential repair costs for all 2 known issues range from €80 to €200. The most expensive issue is typically MAF sensor fault codes.

What years was the Skyactiv-G 2.0 (PE-VPS/PE-VPR) produced?

The Mazda Skyactiv-G 2.0 (PE-VPS/PE-VPR) was produced from 2012 to present. It is a 1998cc I4 petrol na engine.

Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.