G6BA 2.7 V6
Hyundai/Kia · G6BA 2.7 V6 Delta
2004–2010
"Simple naturally aspirated 2.7 V6 of the first Tucson, Sportage and Santa Fe. German guides call it basically reliable and US examples have passed 400,000 km. The one thing that matters is the timing belt: it is an interference engine, the hydraulic tensioner can wreck the belt early, and a broken belt bends the valves. Change belt, tensioner and pulleys on time (every 60,000-90,000 km) and check the crankshaft pulley. Very thirsty, especially with AWD."
Mileage Risk Timeline
When problems typically appear — enter your mileage to see your risk zone
Known Issues 2
Timing belt and hydraulic tensioner (interference engine)
▸Preventive: no warning before it breaks. Check the service book for the last belt, tensioner and pulley change; a jumped belt usually means the engine will not start
Belt-driven V6 with interference valve timing: if the belt breaks the valves bend. Reference guides say the belt itself lasts but is often destroyed early by an unreliable hydraulic tensioner or by oil from a leak. German guides give a 90,000 km petrol belt interval, other references 60,000 km. ADAC lists EUR 400 for the belt job; an engine repair after a break is not priced in the sources.
If the belt history is unknown, change belt, tensioner and pulleys immediately after purchase. No Greek-specific data found.
Crankshaft damper pulley separation
▸Wobbling crankshaft pulley, squealing or thrown accessory belt, sudden loss of power steering and charging
The crankshaft pulley has an outer ring bonded to the hub with rubber; owners of 2.7 V6 Hyundai and Kia models report the ring separating, throwing the accessory belt and cutting power steering, and in one Kia Optima case the timing belt came off its pulleys. A reference guide lists crankshaft pulley wear among the typical problems. No recall or bulletin found and no EUR figure in the sources.
Inspect the pulley at every belt change. No Greek-specific data found.
Models with G6BA 2.7 V6 4
Related Guides
Other Hyundai/Kia Engines
G6DP 3.3 V6 TT
G6DP 3.3 V6 Twin-Turbo Lambda
View details → Compare: G6BA 2.7 V6 vs G6DP 3.3 V6 TTSmartstream G3.5 (G6DU / G6DT)
Smartstream G3.5 MPi / GDi V6 (Lambda III)
View details → Compare: G6BA 2.7 V6 vs Smartstream G3.5 (G6DU / G6DT)Kappa II / Smartstream 1.2 MPI-DPi (G4LF)
1.2L I4 (1,197 cc)
View details → Compare: G6BA 2.7 V6 vs Kappa II / Smartstream 1.2 MPI-DPi (G4LF)Tuning Potential
None practical
Frequently Asked Questions
Is the Hyundai/Kia G6BA 2.7 V6 reliable?
The Hyundai/Kia G6BA 2.7 V6 scores 87/100 with a verdict of BEST. It has 2 documented issues with total repair costs between €400 and €400.
What are the common problems with the G6BA 2.7 V6?
The most common issues are:
- Timing belt and hydraulic tensioner (interference engine) — high, repair cost €400–€400, 60,000 km–90,000 km
- Crankshaft damper pulley separation — moderate, repair cost N/A–N/A, N/A–N/A
What cars use the Hyundai/Kia G6BA 2.7 V6?
How much does it cost to repair the G6BA 2.7 V6?
Total potential repair costs for all 2 known issues range from €400 to €400. The most expensive issue is typically Timing belt and hydraulic tensioner (interference engine).
What years was the G6BA 2.7 V6 produced?
The Hyundai/Kia G6BA 2.7 V6 was produced from 2004 to 2010. It is a 2656cc V6 petrol na engine.
Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.