EcoBoost 1.0 (post-2018)
Ford · 1.0L Turbo I3
2018–present
"The revised 1.0 three-cylinder in the Fiesta Mk8, Focus Mk4 and Puma (cylinder deactivation, mild hybrid from 2020). Most got a timing chain between 2018 and 2020, but some engine codes kept the wet timing belt and every version still drives the oil pump with a belt running in oil. Use only the Ford-approved oil and keep the change interval; check the engine code before buying."
Mileage Risk Timeline
When problems typically appear — enter your mileage to see your risk zone
Known Issues 3
Wet belts in oil (oil-pump belt; timing belt on some codes) - oil starvation risk
▸Low oil pressure warning, check-engine light, rattling or loud engine noise, loss of power; rubber debris in the sump or on the oil pickup screen
Even where the camshafts went to a chain (2018-2020, by engine code), the oil pump is still driven by a toothed belt in the oil, and some codes (e.g. B3DA, B7JB, B7JC, BZJA, 2019+ Puma) kept the wet timing belt. Degraded belts shed teeth, block the oil pickup and starve the engine. Ford recalled 139,730 US Focus/EcoSport 1.0 Fox Classic cars built to Oct 2021 for oil-pump belt and tensioner failure (2,099 warranty claims). A preventive belt job costs from 1,500 EUR (AutoBild) to about 2,350 EUR (GBP 2,000, converted); a seized engine costs far more (no sourced figure).
No Greek-specific data found. Ask for invoices showing Ford-approved oil (0W-20 WSS-M2C954-A1 or 5W-20 WSS-M2C948-B) and on-time changes; short city trips dilute the oil.
Catalytic converter failure
▸Check-engine light with fault code P0420, rattle from the exhaust, loss of power
German guides report the 1.0 EcoBoost catalytic converter failing in some cases at 70,000-80,000 km. No cost figure in any source.
No Greek-specific data found.
Carbon buildup (DI 3-cyl)
▸Rough idle, hesitation
Post-2018 much improved. Carbon is now the main concern.
Clean at 80k km if symptomatic. Standard modern engine maintenance.
This report covers the combustion engine only. Battery and electric motor reliability are not included.
Models with EcoBoost 1.0 (post-2018) 17
Related Guides
Other Ford Engines
Sigma 1.4
Sigma 1.4 16V (Zetec-SE / Duratec)
View details → Compare: EcoBoost 1.0 (post-2018) vs Sigma 1.4Sigma 1.25
Sigma 1.25 (FUJA/SNJA/STJA)
View details → Compare: EcoBoost 1.0 (post-2018) vs Sigma 1.251.8 TDDi / DI (Endura-DI)
Endura-DI 1.8 TDDi (rotary pump)
View details → Compare: EcoBoost 1.0 (post-2018) vs 1.8 TDDi / DI (Endura-DI)Dragon 1.5 I3 (EcoBoost / Ti-VCT)
1.5L Dragon I3 (turbo and non-turbo)
View details → Compare: EcoBoost 1.0 (post-2018) vs Dragon 1.5 I3 (EcoBoost / Ti-VCT)Tuning Potential
165hp Stage 1
Frequently Asked Questions
Is the Ford EcoBoost 1.0 (post-2018) reliable?
The Ford EcoBoost 1.0 (post-2018) scores 80/100 with a verdict of BUY. It has 3 documented issues with total repair costs between €1,750 and €2,850.
What are the common problems with the EcoBoost 1.0 (post-2018)?
The most common issues are:
- Wet belts in oil (oil-pump belt; timing belt on some codes) - oil starvation risk — critical, repair cost €1,500–€2,350, N/A–N/A
- Catalytic converter failure — moderate, repair cost N/A–N/A, 70,000 km–80,000 km
- Carbon buildup (DI 3-cyl) — minor, repair cost €250–€500, 80,000 km–150,000 km
What cars use the Ford EcoBoost 1.0 (post-2018)?
How much does it cost to repair the EcoBoost 1.0 (post-2018)?
Total potential repair costs for all 3 known issues range from €1,750 to €2,850. The most expensive issue is typically Wet belts in oil (oil-pump belt; timing belt on some codes) - oil starvation risk.
What years was the EcoBoost 1.0 (post-2018) produced?
The Ford EcoBoost 1.0 (post-2018) was produced from 2018 to present. It is a 999cc I3 petrol turbo engine.
Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.