BMW S65
CAUTION Turbo Chaos

S65

BMW · S65 4.0 V8

2007–2013

0 / 100
CAUTION

"The 4.0 V8 of the E90/E92/E93 BMW M3 (2007-2013, 420 hp, 8,300 rpm): eight individual throttle bodies, chain-driven cams and a glorious sound. Its known weakness is the connecting-rod bearings, which wear early and can destroy the engine with little warning - US owners have filed dozens of complaints with NHTSA, some below 70,000 km, and German specialists treat replacing the bearings every 80,000-100,000 km as compulsory. The throttle actuators are the next most common fault (limp mode). Engine guides also mention VANOS repairs and oil use of up to 1 litre per 1,000 km. Buy only with proof of a bearing service, or budget for one."

Layout V8
Displacement 3999 cc
Power 420 hp
Type Petrol Na
Known Issues 3
Total Risk Cost €0–€0

Mileage Risk Timeline

When problems typically appear — enter your mileage to see your risk zone

km

Known Issues 3

◆ CRITICAL

Connecting-rod bearing wear: engine failure without warning

N/A–N/A 69,000 km–100,000 km
View details ▸
Detection

Ticking or knocking from the bottom end, worst when cold; metal particles in the oil; often no warning before failure

Details

The S65 rod bearings wear prematurely. An engine database says they must be changed every 80,000 km, and a German BMW M workshop calls replacement every 80,000-100,000 km a compulsory investment for the S54, S65 and S85. NHTSA holds over 30 owner complaints for 2008-2013 M3s describing rod-bearing failures, several at highway speed with sudden loss of power, including cars at about 43,000 miles (69,000 km) and 55,000 miles (88,000 km) and some needing a new engine. No recall exists. No source gives a euro price for the S65 bearing job.

Greece Note

Ask for invoices showing the rod bearings were replaced; without them, budget for the job before driving hard. No Greek-specific data found.

▲ HIGH

Throttle actuator failure (limp mode)

N/A–N/A N/A–N/A
View details ▸
Detection

Limp mode, loss of power, rough idle, throttle fault codes

Details

The S65 has eight individual throttle bodies moved by electric actuators. The actuators can fail and put the car into limp mode with loss of power and rough idle (carwiki.de); a German BMW M workshop fits reinforced brass or PEEK gear sets for the S65 and S85. US owners report failures in NHTSA complaints, one stating 40,000-80,000 miles and another under 60,000 miles. No source gives a price for the S65.

Greece Note

Check for throttle fault codes and limp-mode history. No Greek-specific data found.

○ MINOR

Oil consumption

N/A–N/A N/A–N/A
View details ▸
Detection

Frequent oil top-ups; check the oil level often

Details

An engine database lists oil consumption of up to 1,000 g per 1,000 km for the S65, and carwiki.de says some owners report excessive oil use, noting that some consumption is normal for a high-revving engine. Use 10W-60 oil with BMW M approval.

Greece Note

Check the oil level at every fuel stop on track days or long trips. No Greek-specific data found.

Models with S65 1

Related Guides

Other BMW Engines

Tuning Potential

Individual throttle bodies, supercharger

Frequently Asked Questions

Is the BMW S65 reliable?

The BMW S65 scores 61/100 with a verdict of CAUTION. It has 3 documented issues with total repair costs between €0 and €0.

What are the common problems with the S65?

The most common issues are:

  • Connecting-rod bearing wear: engine failure without warning — critical, repair cost N/A–N/A, 69,000 km–100,000 km
  • Throttle actuator failure (limp mode) — high, repair cost N/A–N/A, N/A–N/A
  • Oil consumption — minor, repair cost N/A–N/A, N/A–N/A
What cars use the BMW S65?

The S65 is found in:

  • M3 (2008–2013)
How much does it cost to repair the S65?

Total potential repair costs for all 3 known issues range from €0 to €0.

What years was the S65 produced?

The BMW S65 was produced from 2007 to 2013. It is a 3999cc V8 petrol na engine.

Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.