Higher reliability score
M64 (993: M64/05, M64/06, M64/21; Turbo M64/60) BUY 81/100
+11 points over M97
0 / 100
ACCEPTABLE M97 Porsche
0 / 100
BUY M64 (993: M64/05, M64/06, M64/21; Turbo M64/60) Porsche

Specifications

M97
M64 (993: M64/05, M64/06, M64/21; Turbo M64/60)
Brand
Porsche
Porsche
Verdict
ACCEPTABLE
BUY
Reliability
70
81
Years
2005--2012
1993--1998
Displacement
3800 cc
3600 cc
Layout
F6
F6
Type
Petrol Na
Petrol Na
Power
325--385 hp
272--408 hp
Known Issues
3
3
Total Risk Cost
€6,500--€18,400
€0--€0

Character

M97

"Porsche M97 flat-six of the 997.1 Carrera and Carrera S (3.6/3.8) and the 987.1 Boxster S and Cayman S (3.4), 2005-2008. From 2006 it has a larger intermediate shaft (IMS) bearing, so IMS failures are much rarer than on the M96, but the bearing cannot be replaced without splitting the engine. The main risk is bore scoring, mostly on 3.6/3.8 engines from about 100,000 km: rising oil use, a sooty left tailpipe and ticking at idle. Insist on a borescope inspection before buying. Replaced by the IMS-free 9A1 in 2009."

M64 (993: M64/05, M64/06, M64/21; Turbo M64/60)

"The 3.6 air-cooled flat-six of the Porsche 993 (1993-1998), the last air-cooled 911: Carrera 272 hp, Carrera S 285 hp with VarioRam, and the 408 hp twin-turbo Turbo. No IMS bearing - that is the later water-cooled M96. The known weak spot of the naturally aspirated engines is valve-guide wear: worn guides burn oil and clog the secondary-air ports, and the Porsche Club of America says every non-Turbo 993 will need its guides done eventually. The Turbo used a better guide material. Otherwise expect age-related oil leaks and change the twin-distributor drive belt on time. Ask for oil-use history and a leak-down test."

Issues Comparison

M97 3

◆ CRITICAL
Intermediate shaft (IMS) bearing failure - rarer with the larger 2006+ bearing N/A--N/A 80,000 km--N/A
◆ CRITICAL
Bore scoring (cylinder wall scoring), mainly 3.6/3.8 and 3.4 S €6,500--€18,400 100,000 km--N/A
○ MINOR
Rear main seal and IMS cover oil leaks N/A--N/A N/A--N/A

M64 (993: M64/05, M64/06, M64/21; Turbo M64/60) 3

▲ HIGH
Valve-guide wear and clogged secondary-air ports (non-Turbo 993) N/A--N/A N/A--N/A
● MODERATE
Twin-distributor drive belt failure N/A--N/A N/A--N/A
○ MINOR
Oil leaks (case through-bolts, valve covers, rear main seal, chain housings) N/A--N/A N/A--N/A

Models

Full M97 Report Full M64 (993: M64/05, M64/06, M64/21; Turbo M64/60) Report