M96 vs 9A2 / 9A2 Evo
Side-by-side reliability comparison
Specifications
Character
M96
"The first water-cooled Porsche flat-six, used in the 986 Boxster (2.5/2.7/3.2) and 996 Carrera (3.4/3.6), 1997-2005. Lovely to drive, but it carries three expensive risks: the intermediate shaft (IMS) bearing, worst on the single-row bearing of 2000-2005 cars (about 8-10% failures, subject of a US class action); cracked or slipped cylinder liners and "D-chunk" cracks in the Lokasil bores, most common on early 996s; and bore scoring. The rear main seal weeps on many cars. Buy only with proof of an IMS retrofit or a recent inspection, a clean oil filter and a borescope check. The 996 Turbo, GT2 and GT3 use the different Mezger engine."
9A2 / 9A2 Evo
"Porsche 3.0 twin-turbo flat-six in the 991.2 Carrera (2016-2019) and the 992 Carrera (9A2 Evo, 2019 on). No IMS bearing and no bore-scoring pattern. The weak spot is the turbochargers: oil reaching the turbo seals causes blue smoke and turbo replacement, sometimes before 50,000 km. Coolant pump leaks into the vacuum lines are also documented. Strong and efficient, but repairs are at Porsche prices."