1.0 Turbo B10XFL / B10XFT / D10XFL / D10XFT vs A28NET/A28NER 2.8T V6
Side-by-side reliability comparison
Higher reliability score
A28NET/A28NER 2.8T V6
BUY
81/100
+12 points over 1.0 Turbo B10XFL / B10XFT / D10XFL / D10XFT
0
/ 100
ACCEPTABLE
1.0 Turbo B10XFL / B10XFT / D10XFL / D10XFT
Opel
0
/ 100
BUY
A28NET/A28NER 2.8T V6
Opel
Specifications
1.0 Turbo B10XFL / B10XFT / D10XFL / D10XFT
A28NET/A28NER 2.8T V6
Brand
Opel
Opel
Verdict
ACCEPTABLE
BUY
Reliability
69
81
Years
2014--2019
2008--2017
Displacement
999 cc
2792 cc
Layout
I3
V6
Type
Petrol Turbo
Petrol Turbo
Power
90--115 hp
260--325 hp
Known Issues
7
2
Total Risk Cost
€1,130--€2,450
€2,350--€2,950
Character
1.0 Turbo B10XFL / B10XFT / D10XFL / D10XFT
"Punchy little three-cylinder direct-injection turbo for the Adam, Corsa E and Astra K. The real risk is low-speed pre-ignition cracking pistons or rings on cars built until about the end of 2018 - use dexos1 Gen 2 oil, do not lug it, and ask for a compression test."
A28NET/A28NER 2.8T V6
"GM 2.8 turbo V6 (the Saab and Vectra OPC engine) in the Insignia 2.8 V6 Turbo 4x4 and Insignia OPC/VXR. Strong and fast, but two weak spots: stretched timing chains, mostly on cars built before 2011 (a revised chain kit exists), and leaking exhaust manifolds that can hurt the turbo. Check for engine-light history and poor running, and look at the four-wheel-drive Haldex and rear axle too."
Issues Comparison
1.0 Turbo B10XFL / B10XFT / D10XFL / D10XFT 7
▲ HIGH
Low-speed pre-ignition (LSPI) — piston / ring damage, compression loss
● MODERATE
Timing chain stretch (3-cylinder stress)
○ MINOR
Thermostat failure
○ MINOR
Direct-injection carbon build-up — coked injectors and intake
○ MINOR
Ignition coil failure
○ MINOR
Engine mount wear (3-cyl vibration)
○ MINOR
Turbo wastegate rattle
A28NET/A28NER 2.8T V6 2
▲ HIGH
Timing chain stretch (mainly cars built before 2011)
● MODERATE
Exhaust manifold leak - possible turbo damage