Higher reliability score
4G13 BUY 84/100
+4 points over 6G72
0 / 100
BUY 4G13 Mitsubishi
0 / 100
BUY 6G72 Mitsubishi

Specifications

4G13
6G72
Brand
Mitsubishi
Mitsubishi
Verdict
BUY
BUY
Reliability
84
80
Years
1996--2008
1990--2006
Displacement
1298 cc
2972 cc
Layout
I4
V6
Type
Petrol Na
Petrol Na
Power
75--82 hp
178--220 hp
Known Issues
3
5
Total Risk Cost
€0--€0
€250--€0

Character

4G13

"Simple 1.3-litre SOHC petrol from the Colt, Lancer, Space Star and Carisma. Long-lived and cheap to keep if the timing belt is changed on time - it is an interference engine, so a snapped belt bends the valves. Expect rising oil consumption at high mileage and the odd idle or ignition fault. Most versions have no hydraulic lifters, so the valve clearances need checking."

6G72

"Old, simple 3.0 V6 used in the Pajero IV and many earlier Mitsubishi and Chrysler cars. With good maintenance it often passes 400,000 km. Weak points are wear items: the timing belt and its hydraulic tensioner, hydraulic lifters that start to knock, and oil consumption from rings and valve-stem seals after about 100,000 km. Keep the oil level up to protect the narrow crank bearings."

Issues Comparison

4G13 3

▲ HIGH
Timing belt (interference) N/A--N/A N/A--90,000 km
● MODERATE
Oil consumption from worn valve stem seals and piston rings N/A--N/A 200,000 km--N/A
○ MINOR
Unstable idle and ignition faults N/A--N/A N/A--N/A

6G72 5

▲ HIGH
Timing belt and hydraulic tensioner failure N/A--N/A N/A--N/A
▲ HIGH
Crankshaft bearing wear from oil starvation N/A--N/A 250,000 km--300,000 km
● MODERATE
Oil consumption from worn piston rings and valve-stem seals N/A--N/A 100,000 km--N/A
○ MINOR
Crankshaft pulley bolt can loosen (US recall) N/A--N/A N/A--N/A
○ MINOR
Hydraulic lifter knock €250--N/A 100,000 km--200,000 km

Models

Full 4G13 Report Full 6G72 Report