Higher reliability score
U 1.1 CRDi (D3FA) BUY 84/100
+21 points over Theta II 2.4 MPI (G4KE)
0 / 100
CAUTION Theta II 2.4 MPI (G4KE) Hyundai/Kia
0 / 100
BUY U 1.1 CRDi (D3FA) Hyundai/Kia

Specifications

Theta II 2.4 MPI (G4KE)
U 1.1 CRDi (D3FA)
Brand
Hyundai/Kia
Hyundai/Kia
Verdict
CAUTION
BUY
Reliability
63
84
Years
2009--2020
2005--2019
Displacement
2359 cc
1120 cc
Layout
I4
I3
Type
Petrol Na
Diesel
Power
174--179 hp
75 hp
Known Issues
1
3
Total Risk Cost
€4,600--€0
€0--€1,800

Character

Theta II 2.4 MPI (G4KE)

"Port-injected 2.4 from the Santa Fe CM, Sorento XM (to 2012), ix35 and many US Hyundai/Kia models. US cars built 2010-2015 were recalled because the connecting-rod bearings can wear early, leading to knocking, a stall or in rare cases an engine fire. European owners report few problems, and it avoids the carbon build-up of the direct-injection 2.4 GDI. Listen for knocking and check the oil level."

U 1.1 CRDi (D3FA)

"Three-cylinder 1.1 CRDi diesel (2005-2019) from the Hyundai/Kia U family, used in the Kia Picanto, Hyundai i10 and i20 and Kia Rio. 75 hp, Bosch common rail, very low fuel use. No widespread serious fault is documented; the main costs come from soot clogging the EGR valve and intake swirl flaps in town driving, and early engines can push oil into the intake through the crankcase breather. Owners report 290,000 km and more. Evidence is limited, so the score is capped."

Issues Comparison

Theta II 2.4 MPI (G4KE) 1

◆ CRITICAL
Connecting-rod bearing wear - knocking, stall, fire risk (US recall) €4,600--N/A N/A--N/A

U 1.1 CRDi (D3FA) 3

● MODERATE
EGR valve and intake swirl flaps clogged with soot N/A--€1,800 50,000 km--100,000 km
○ MINOR
Oil consumption through the crankcase breather (first generation) N/A--N/A N/A--N/A
○ MINOR
Engine block internal corrosion (2008 service action) €0--€0 N/A--N/A

Models

Full Theta II 2.4 MPI (G4KE) Report Full U 1.1 CRDi (D3FA) Report