Duratec V6 2.5 / 3.0 (LCBD, REBA, MEBA) vs Duratec HE 2.0
Side-by-side reliability comparison
Specifications
Character
Duratec V6 2.5 / 3.0 (LCBD, REBA, MEBA)
"Ford's all-alloy Duratec V6 in the Mondeo Mk3: 2.5 (170 hp) and 3.0 (ST220, 226 hp), with timing chains. Smooth and long-lived when the oil is changed on time - one Mondeo V6 reached 291,000 miles - but it does not forgive low or old oil: worn chain tensioners and bottom-end failures have finished many neglected ST220s. Expect oil leaks (rear crankshaft seal, cam covers, sump), sticking intake runner flaps (IMRC), a fuel pump that fails around 100,000 miles (tank out) and ageing cooling parts. Listen for chain rattle and bottom-end knocks before buying."
Duratec HE 2.0
"The 2.0 16V petrol shared by Mazda (MZR LF-DE / LF-VE: Mazda 3, Mazda 5, Mazda 6, MX-5 NC) and Ford (Duratec HE 2.0: Mondeo Mk3/Mk4, Focus Mk2, C-Max, S-Max, Galaxy, Fiesta ST), also used by Volvo (S40/V50). Naturally aspirated, timing chain, 141-160 hp; engine guides quote 300,000-400,000 km with care. Two things to check: the plastic intake flaps wear, stick and can break off into the engine - most reports are on Ford Mondeo Mk3 and Focus Mk2, but Mazda-side guides report it on early Mazda engines too, and Mazda issued a bulletin for sticking flaps on 2004-2009 Mazda 3 (listen for a rattle at idle) - and oil use rises at high mileage. No hydraulic lifters, so valve clearances need periodic checks."