FireFly 1.0 T3 vs FIRE 1.2 8V/16V
Side-by-side reliability comparison
Higher reliability score
FIRE 1.2 8V/16V
BEST
88/100
+16 points over FireFly 1.0 T3
0
/ 100
ACCEPTABLE
FireFly 1.0 T3
Fiat
0
/ 100
BEST
FIRE 1.2 8V/16V
Fiat
Specifications
FireFly 1.0 T3
FIRE 1.2 8V/16V
Brand
Fiat
Fiat
Verdict
ACCEPTABLE
BEST
Reliability
72
88
Years
2018--present
1993--2020
Displacement
999 cc
1242 cc
Layout
I3
I4
Type
Petrol Turbo
Petrol Na
Power
100--120 hp
60--80 hp
Known Issues
0
5
Total Risk Cost
€0--€0
€15--€0
Character
FireFly 1.0 T3
"Three-cylinder GSE turbo with direct injection, MultiAir III valve control and a timing chain (not a belt). Used in the Fiat 500X and Tipo and the Jeep Renegade. No engine recall in Europe and no documented failure pattern, but it is young, mileage evidence is thin, and one Italian guide reports early turbo wear on some cars. Use the oil grade in the handbook."
FIRE 1.2 8V/16V
"Simple belt-driven 1.2 that powered the Panda, Punto and 500 for over 20 years. 300,000-400,000 km without major work is documented. Slow, but cheap to fix at any workshop. Keep the belt on time - the 16V and the later VVT 8V are interference engines."
Issues Comparison
FireFly 1.0 T3 0
No documented issues.
FIRE 1.2 8V/16V 5
▲ HIGH
Timing belt - 120,000 km interval (interference on 16V and VVT 8V)
● MODERATE
Oil leaks, head gasket seep and oil use on older engines
○ MINOR
Thermostat seal failure - engine runs cold
○ MINOR
Water pump (replace with belt)
○ MINOR
Dirty throttle body - rough idle and stalling