1.9 JTD / JTDm / MultiJet (8v and 16v) vs 3.0 JTD/MJT
Side-by-side reliability comparison
Specifications
Character
1.9 JTD / JTDm / MultiJet (8v and 16v)
"Fiat's 1,910 cc common-rail diesel, launched in the Alfa 156 in 1997 as the first common-rail diesel car, and later sold as 1.9 JTD, JTDm and MultiJet in Fiat, Alfa Romeo and Lancia models, as the Opel/Vauxhall 1.9 CDTI (Astra H, Vectra C, Signum, Zafira B) and as the Saab 1.9 TiD/TTiD (8-valve 80-130 hp, 16-valve 140-170 hp). The core engine is robust and often passes 200,000-300,000 km. The EGR valve is the most common complaint, followed by the dual-mass flywheel and clutch and the alternator. The 16-valve versions (Opel Z19DTH 150 hp) have an intake manifold with swirl flaps that wear and stick. The water pump is driven by the timing belt: if it seizes it can throw the belt and damage the engine, so belt and pump must be changed together and on time."
3.0 JTD/MJT
"Iveco's (FPT) 3.0-litre four-cylinder common-rail diesel, code F1C: the Fiat Ducato 3.0 MultiJet 160 and 180 (2006-2014), also the Peugeot Boxer / Citroen Jumper 3.0 HDi, the Iveco Daily 3.0 and the Ram ProMaster EcoDiesel. It is a four-cylinder, not a V6, and unlike the 2.3 MultiJet it has a timing chain instead of a belt. No engine-destroying fault is documented. The weak points are emissions parts: the EGR valve and EGR cooler clog, and boost-control or turbo faults and a blocked particulate filter on later Euro 5 vans put it into limp mode. Motorhomes that only cruise at low revs suffer most."