6.0 W12 vs EA837 3.0 TFSI supercharged
Side-by-side reliability comparison
Specifications
Character
6.0 W12
"Audi's naturally aspirated 6.0 W12 in the A8 D3 (2003-2010): two narrow-angle VR6 banks on one crank, 450 PS. With good care it is a durable long-runner, but it is complex and very sensitive to overheating, which can score the cylinders and raise oil use. The cams are driven by three chains at the flywheel end; worn tensioners mean an engine-out repair, as do some of the eight lambda sensors. It dislikes short trips, sustained full load and tuning. Repair costs are high and not every workshop will take it on."
EA837 3.0 TFSI supercharged
"Audi's supercharged 3.0 TFSI V6 (2008-2017): S4 and S5 B8, A6 and A7 C7, A8 D4, Q5 and SQ5 8R, Q7, VW Touareg and the Porsche Cayenne and Panamera S E-Hybrid. Chain-driven with direct injection; well-kept examples pass 240,000-320,000 km. The thermostat, water pump and PCV valve are the usual repairs, and the thermostat and PCV sit under the supercharger, so labour is expensive. Early cars had a fuel-rail leak recall and a cold-start chain-tensioner rattle covered by a bulletin. Check for coolant loss and oil use before buying."