M57
BMW · 3.0L Turbo Diesel I6
1998–2012
"The diesel six that made the 330d, 530d and X5 3.0d. Smooth, torquey and long-lived - 400,000 km cars exist. Its known faults are around the core: early metal swirl flaps (cars built to about 2004) can break into the engine, TU/TU2 exhaust manifolds crack, and injectors, turbo and the crank pulley damper wear with age."
Mileage Risk Timeline
When problems typically appear — enter your mileage to see your risk zone
Known Issues 7
Swirl flaps break and fall into the cylinders (early metal flaps, builds to about 2004)
▸Usually no warning: sudden knocking, misfire, smoke and loss of power when a flap or its screw drops into a cylinder. On inspection, loose or worn flap spindles in the intake manifold.
The early swirl-flap mechanism (metal flaps and spindles) can break at the fixing; parts are sucked into the cylinder and damage piston, valves and head. German guides date it to cars built up to March 2004 (pre-TU); from the TU revision the flaps are plastic with a holder and thicker spindles. Some sources limit it to automatic cars or to the 192/193 PS version. Prevention: remove the flaps (blanking kit) or replace the intake manifold - about 2,500 PLN (approx. EUR 580, converted). An engine hit by a flap is a cylinder-head or engine job; no fetched source gave a reliable figure.
On any E39, E46, E53 or early E60 3.0d/2.5d ask whether the flaps have been removed or the manifold replaced. No Greek-specific data found.
Exhaust manifold cracks (TU/TU2)
▸Exhaust smell in the cabin, worse under hard acceleration; soot traces around the manifold; ticking from the engine bay
The thin stainless exhaust manifold of the M57TU and TU2 cracks; German guides say BMW fixed it from September 2005 production, while owners report original-style replacements cracking again and fit cast-iron manifolds. No EUR or km in any fetched source.
Check with the engine cover off for soot on the manifold. No Greek-specific data found.
Turbo wear and variable-vane control faults
▸Power loss, limp mode, black or blue smoke, whistling, rising oil use
Turbo failures are reported as not uncommon on high-mileage cars. Up to late 2003 the variable-vane turbo is vacuum-controlled and collapsed or clogged hoses mimic a dead turbo - check the actuator and lines first. Later electronic actuators cannot be repaired separately. No EUR in any fetched source.
Let the engine idle before switching off after a hard motorway run. No Greek-specific data found.
Injector wear or sticking
▸Hard starting, rough idle, smoke, misfire or uneven running
Injector life is 100,000-300,000 km depending on generation; sooting from short trips shortens it and stuck injectors can be hard to remove. Repair 250-400 PLN, new 800-1,600 PLN per injector (approx. EUR 60-370, converted). Usually regenerable.
Long runs help; short city trips soot the injectors. No Greek-specific data found.
Intake manifold oil leak (TU, 2003-2010)
▸Oily residue around the intake manifold (Ansaugbruecke) and its joints
Leaking intake manifolds are reported on the M57TU from October 2003 and on E90 325d to 02/2010, 330d to 09/2008 and the 335d. Oil mist from the breather and EGR collects in the manifold. No EUR or km in any fetched source.
Look for oil around the manifold before buying. No Greek-specific data found.
Crankshaft pulley vibration damper failure
▸Wobbling or noisy pulley at the front of the engine, rubber cracking or separating, belt jumping off
The rubber-bonded vibration damper on the crankshaft pulley breaks up; one database reports it typically by about 100,000 km, a Polish guide says especially on newer versions where the AC belt runs without a tensioner. Original pulley at least 1,250 PLN (approx. EUR 290, converted), parts only. A failed damper can throw the belt.
Cheap to check at a service - look at the pulley rubber. No Greek-specific data found.
EGR and intake soot, clogged crankcase breather, DPF loading on short trips
▸Gradual power loss, rough running, EGR or DPF warnings, oil mist in the intake pipes
Short trips make the engine filthy inside: soot in the EGR valve and intake, a clogged crankcase breather (oil separator) that pushes oil into the turbo pipes, and a loaded DPF on later cars. Cleaning the intake tract is the first step on a poorly running M57. No EUR or km in any fetched source.
Athens stop-and-go use is the worst case; a regular motorway run helps. No Greek-specific data found.
Models with M57 18
Related Guides
Other BMW Engines
Tuning Potential
300hp Stage 1
Frequently Asked Questions
Is the BMW M57 reliable?
The BMW M57 scores 78/100 with a verdict of BUY. It has 7 documented issues with total repair costs between €930 and €370.
What are the common problems with the M57?
The most common issues are:
- Swirl flaps break and fall into the cylinders (early metal flaps, builds to about 2004) — critical, repair cost €580–N/A, N/A–N/A
- Exhaust manifold cracks (TU/TU2) — moderate, repair cost N/A–N/A, N/A–N/A
- Turbo wear and variable-vane control faults — moderate, repair cost N/A–N/A, N/A–N/A
- Injector wear or sticking — moderate, repair cost €60–€370, 100,000 km–300,000 km
- Intake manifold oil leak (TU, 2003-2010) — minor, repair cost N/A–N/A, N/A–N/A
What cars use the BMW M57?
How much does it cost to repair the M57?
Total potential repair costs for all 7 known issues range from €930 to €370. The most expensive issue is typically Injector wear or sticking.
What years was the M57 produced?
The BMW M57 was produced from 1998 to 2012. It is a 2993cc I6 diesel engine.
Scores are calculated from documented issues, repair costs, and failure patterns across thousands of owner reports and technical sources. Learn about our methodology. Always inspect before you buy.