M96 vs 9A1/MA1
Side-by-side reliability comparison
Specifications
Character
M96
"The first water-cooled Porsche flat-six, used in the 986 Boxster (2.5/2.7/3.2) and 996 Carrera (3.4/3.6), 1997-2005. Lovely to drive, but it carries three expensive risks: the intermediate shaft (IMS) bearing, worst on the single-row bearing of 2000-2005 cars (about 8-10% failures, subject of a US class action); cracked or slipped cylinder liners and "D-chunk" cracks in the Lokasil bores, most common on early 996s; and bore scoring. The rear main seal weeps on many cars. Buy only with proof of an IMS retrofit or a recent inspection, a clean oil filter and a borescope check. The 996 Turbo, GT2 and GT3 use the different Mezger engine."
9A1/MA1
"Porsche's second-generation water-cooled flat-six with direct injection (9A1/MA1): 997.2 and 991.1 Carrera, 987.2 and 981 Boxster and Cayman, 2.7 to 3.8 litres. A closed-deck crankcase, integrated dry sump and front-mounted timing chains removed the IMS bearing that haunted the M96/M97. Specialists still see occasional bore scoring and piston seizures, mostly blamed on hard driving with a cold engine, so let it warm up before high revs and inspect with a borescope before buying. Direct injection dilutes the oil with fuel: shorter oil-change intervals are advised."