Higher reliability score
3.0 JTD/MJT BUY 83/100
+9 points over 1.6 MultiJet
0 / 100
ACCEPTABLE 1.6 MultiJet Fiat
0 / 100
BUY 3.0 JTD/MJT Fiat

Specifications

1.6 MultiJet
3.0 JTD/MJT
Brand
Fiat
Fiat
Verdict
ACCEPTABLE
BUY
Reliability
74
83
Years
2008--2025
2006--2014
Displacement
1598 cc
2999 cc
Layout
I4
V6
Type
Diesel
Diesel
Power
90--130 hp
160--177 hp
Known Issues
4
3
Total Risk Cost
€0--€0
€670--€810

Character

1.6 MultiJet

"Fiat 1.6 16v MultiJet diesel used in the Bravo, Doblo, Punto, Tipo, 500L/500X and Lancia Delta (and in Alfa, Jeep and Suzuki models). Mechanically robust; its weak spots are emissions and cooling: the EGR valve and EGR cooler, a DPF that needs motorway runs, the dual-mass flywheel and a timing belt that must be changed on time."

3.0 JTD/MJT

"Iveco's (FPT) 3.0-litre four-cylinder common-rail diesel, code F1C: the Fiat Ducato 3.0 MultiJet 160 and 180 (2006-2014), also the Peugeot Boxer / Citroen Jumper 3.0 HDi, the Iveco Daily 3.0 and the Ram ProMaster EcoDiesel. It is a four-cylinder, not a V6, and unlike the 2.3 MultiJet it has a timing chain instead of a belt. No engine-destroying fault is documented. The weak points are emissions parts: the EGR valve and EGR cooler clog, and boost-control or turbo faults and a blocked particulate filter on later Euro 5 vans put it into limp mode. Motorhomes that only cruise at low revs suffer most."

Issues Comparison

1.6 MultiJet 4

● MODERATE
EGR valve fouling and EGR cooler coolant leak N/A--N/A N/A--N/A
● MODERATE
Timing belt and tensioner — early wear, change on time N/A--N/A N/A--N/A
● MODERATE
DPF regeneration failures on short trips N/A--N/A N/A--N/A
● MODERATE
Dual-mass flywheel wear N/A--N/A N/A--N/A

3.0 JTD/MJT 3

▲ HIGH
Turbo or boost-control failure (limp mode) N/A--N/A N/A--N/A
● MODERATE
EGR valve and EGR cooler clogging (limp mode) €670--€810 N/A--N/A
● MODERATE
Diesel particulate filter blockage (later Euro 5 vans) N/A--N/A N/A--N/A

Models

Full 1.6 MultiJet Report Full 3.0 JTD/MJT Report