6.0 W12 vs 5.2 FSI V10 Gen 2 (dual injection)
Side-by-side reliability comparison
Specifications
Character
6.0 W12
"Audi's naturally aspirated 6.0 W12 in the A8 D3 (2003-2010): two narrow-angle VR6 banks on one crank, 450 PS. With good care it is a durable long-runner, but it is complex and very sensitive to overheating, which can score the cylinders and raise oil use. The cams are driven by three chains at the flywheel end; worn tensioners mean an engine-out repair, as do some of the eight lambda sensors. It dislikes short trips, sustained full load and tuning. Repair costs are high and not every workshop will take it on."
5.2 FSI V10 Gen 2 (dual injection)
"Naturally aspirated 5.2 V10 of the second-generation Audi R8 (Type 4S, 2015-2024, 540-620 hp). It is not turbocharged: Audi lists it as one of the last naturally aspirated engines in its class, with port injection added to the direct injection. No mechanical engine recall is on record; the only engine-related recall is a software update to the engine-sound control (2016-2018 cars). The one documented fault is a dealer bulletin for a false low-oil warning caused by excess factory sealer blocking the oil-pump strainers. UK owner surveys are positive, and the known cost items are the clutch, rear wishbones and magnetic dampers rather than the engine. Few independent reports exist for this low-volume engine, so buy with full Audi service history."